Data Structures

Here are the data structures with brief descriptions:

ble_6lowpan_data_rx_t	Event parameters associated with the BLE_6LO_EVT_INTERFACE_DATA_RX event
ble_6lowpan_event_param_t	Asynchronous event parameter type
ble_6lowpan_event_t	Asynchronous event type
ble_6lowpan_init_t	Initialization parameters type
ble_ipsp_evt_t	IPSP event and associated parameter type
ble_ipsp_handle_t	IPSP handle
ble_ipsp_init_t	IPSP initialization structure
bootloader_settings_t	Structure holding bootloader settings for application and bank data
coap_block_opt_block1_t
coap_message_conf_t	Structure to hold a CoAP message configuration
coap_message_header_t	Structure to hold a CoAP message header
coap_message_t	Structure to hold a CoAP message
coap_observable_t	Struct for CoAP Client for holding an instance of a remote observable resource
coap_observer_t	Struct for CoAP Server for holding an instance of a remote observer
coap_option_t	Structure to hold a CoAP option
coap_port_t	Port identification information
coap_remote_t	Remote endpoint
coap_resource_t	Structure to hold a CoAP endpoint resource
coap_transport_init_t	Transport initialization information
commissioning_evt_t	Structure of events passed by the Commissioning module to the parent layer
commissioning_init_params_t	Structure for initialization parameters of the Commissioning module
commissioning_timer_t	Structure for creating timers in the Commissioning module
dfu_device_info_t	Structure holding basic device information settings
dns6_init_t	Initialization parameters type
dns6_server_param_t	DNS Server parameter
eui48_t	EUI-48 value type
eui64_t
icmp6_header_t
icmp6_ns_param_t
in6_addr	IPv6 address
iot_context_id_t	Context identifiers used in stateful compression
iot_context_t	Context structure used for efficient compression and decompression
iot_dfu_firmware_block_t	Description of single block of firmware
iot_dfu_firmware_desc_t	Description of the new firmware that has been written into flash memory
iot_file_struct_t	Generic IoT File instance structure
iot_interface_t	Encapsulates all information of the 6LoWPAN interface
iot_pbuffer_alloc_param_t	Parameters required to allocate the packet buffer
iot_pbuffer_t	Packet buffer used for exchanging IPv6 payload across layers in both receive and transmit paths
iot_tftp_evt_err_t	TFTP error event structure
iot_tftp_evt_param_t	TFTP event structure
iot_tftp_evt_t	Asynchronous event type
iot_tftp_init_t	TFTP initialization structure
iot_tftp_trans_params_t	TFTP Transmission initialization structure (both GET and PUT)
iot_timer_client_t	IoT Timer client structure
iot_timer_clients_list_t	IoT Timer client list structure
ipso_accelerometer_t
ipso_actuation_t
ipso_analog_input_t
ipso_analog_output_t
ipso_barometer_t
ipso_digital_input_t
ipso_digital_output_t
ipso_generic_sensor_t
ipso_humidity_t
ipso_illuminance_t
ipso_light_control_t
ipso_load_control_t
ipso_magnetometer_t
ipso_power_control_t
ipso_power_measurement_t
ipso_presence_t
ipso_set_point_t
ipso_temperature_t
ipv6_addr_conf_t	IPv6 address configuration
ipv6_addr_t
ipv6_data_rx_t	Event parameters associated with the IPV6_EVT_INTERFACE_RX_DATA event
ipv6_event_param_t	Asynchronous event parameter type
ipv6_event_t	Asynchronous event type
ipv6_header_t
ipv6_init_t	Initialization parameters type
ipv6_medium_ble_adv_params_t	Structure for storing all advertisement parameters
ipv6_medium_ble_cb_params_t	Structure of BLE-specific parameters of events passed to the parent layer by the IPv6 medium
ipv6_medium_ble_error_params_t	Structure of BLE-specific parameters of errors passed to the parent layer by the IPv6 medium
ipv6_medium_ble_gap_params_t	Structure for storing all GAP parameters
ipv6_medium_error_t	Type of IPv6 medium error parameters
ipv6_medium_evt_t	Type of IPv6 medium event parameters
ipv6_medium_init_params_t	Structure for initialization parameters of the IPv6 medium
ipv6_medium_instance_t	IPv6 medium instance type
lwm2m_acl_t
lwm2m_client_identity_t	LWM2M client identity structure type
lwm2m_connectivity_monitoring_t
lwm2m_connectivity_statistics_t
lwm2m_device_t
lwm2m_firmware_t
lwm2m_identity_string_t	LWM2M identity string
lwm2m_instance_prototype_t	LWM2M instance structure
lwm2m_location_t
lwm2m_object_prototype_t	LWM2M object prototype structure
lwm2m_opaque_t	LWM2M opaque type
lwm2m_security_t
lwm2m_server_config_t	LWM2M server configuration type
lwm2m_server_t
lwm2m_software_update_t
lwm2m_string_t	LWM2M string type
mqtt_binstr_t	Abstracts binary strings
mqtt_client_t	MQTT Client definition to maintain information relevant to the client
mqtt_evt_param_t	Defines event parameters notified along with asynchronous events to the application. Currently, only MQTT_EVT_PUBLISH is accompanied with parameters
mqtt_evt_t	Defined MQTT asynchronous event notified to the application
mqtt_publish_message_t	Parameters for a publish message
mqtt_publish_param_t
mqtt_subscription_list_t	List of topics in a subscription request
mqtt_topic_t	Abstracts MQTT UTF-8 encoded topic that can be subscribed to or published
mqtt_utf8_t	Abstracts UTF-8 encoded strings
nrf_tls_certificate_t	Certificate to be used when using certificates for key derivation
nrf_tls_instance_t	TLS Instance identifier
nrf_tls_key_settings_t	Key settings to be used for TLS instance
nrf_tls_options_t	Options when requesting an TLS instance
nrf_tls_preshared_key_t	Information needed when using Pre-shared key ciphers
nrf_tls_raw_key_t	Information provided when using Raw Public key ciphers
sntp_client_cb_param_t	SNTP client callback parameter
sntp_client_init_param_t	SNTP client initialization structure
sockaddr	Generic socket address
sockaddr_in6	Address record for IPv6 addresses
ssl_ciphers_t
ssl_context_t
ssl_identity_t
ssl_psk_t
udp6_header_t
udp6_socket_t	UDP socket reference