===============================================================================================
                               Random Number Generator Example Program
===============================================================================================
Copyright(C) Redpine Signals 2016
All rights reserved by Redpine Signals.

This program should be used on your own responsibility.
Redpine Signals assumes no responsibility for any losses
incurred by customers or third parties arising from the use of this file. 
                                                  
Function description:
===============================================================================================
This example explains how to verify the random number generation,this example 100 random number 
generate and print on hyper-terminal by using UART. 
===============================================================================================
Environment
===============================================================================================
Test Board:
---------------------
Smart EVK 

---------------------


Assistance software:
---------------------
None

===============================================================================================
Usage Procedure:
===============================================================================================
compile and run the application and connect the usb to uart on board and see the output on hyper-terminal.
===============================================================================================

===============================================================================================
Pass criteria:
===============================================================================================
This example generate 100 random  read the output buffer or see the prints.
===============================================================================================

===============================================================================================
Notice:
===============================================================================================
1) Enable DEBUG_UART macro in tool pre-processor window. 
2)The print's content can be observed on any serial terminal  through UART to USB(J21) . 
===============================================================================================